MedElevator Войти в исследования
← Поиск публикаций

DOI 10.3233/bme-230170

Медицинская библиотека · Bio-medical materials and engineering · 2024

Quantification of mechanical behavior of rat tail under compression.

Moore Kevin D, Wu John Z, Krajnak Kristine, Warren Christopher, Dong Renguang G

СтатьяПеревод в очереди

Аннотация

BACKGORUND: The development of vibration-induced finger disorders is likely associated with combined static and dynamic responses of the fingers to vibration exposure. To study the mechanism of the disorders, a new rat-tail model has been established to mimic the finger vibration and pressure exposures. However, the mechanical behavior of the tail during compression needs to be better understood to improve the model and its applications.

OBJECTIVE

To investigate the static and time-dependent force responses of the rat tail during compression.

METHODS

Compression tests were conducted on Sprague-Dawley cadaver rat tails using a micromechanical system at three deformation velocities and three deformation magnitudes. Contact-width and the time-histories of force and deformation were measured. Additionally, force-relaxation tests were conducted and a Prony series was used to model the force-relaxation behavior of the tail.

RESULTS

The rat tails' force-deformation and stiffness-deformation relationships were strongly nonlinear and time-dependent. Force/stiffness increased with an increase in deformation and deformation velocity. The time-dependent force-relaxation characteristics of the tails can be well described using a Prony series.

CONCULSIONS: We successfully quantified the static and time-dependent force responses of rat tails under compression. The identified mechanical behavior of the tail can help improve the rat-tail model and its applications.

Для цитирования: Moore Kevin D, Wu John Z, Krajnak Kristine, Warren Christopher, Dong Renguang G. Quantification of mechanical behavior of rat tail under compression.. Bio-medical materials and engineering. 2024. DOI: 10.3233/bme-230170.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.