Intraoperative radiographic analysis and adjustment of the optimal position of plate in high tibial osteotomy.

BACKGROUND

When high tibial osteotomy is performed for genu varus deformity, it is not easy to determine the accurate placement of the plate.

PURPOSE: To determine a simple way to assess the position of the plate, to provide more effective mechanical support and to reduce the risk of implant rupture and vascular injury.

MATERIAL AND

METHODS

Two human anatomical marks, the patellar ligament and semimembranosus, were connected and divided into four parts to identify points Ⅰ, Ⅱ, and Ⅲ. These points determined the areas for Tomofix placement: anterior, anterolateral, and lateral. Simulated internal fixation placed hole B of Tomofix at points Ⅰ (anterior), Ⅱ (anterolateral), and Ⅲ (lateral). We analyzed the pointing direction of the locking screws in Tomofix holes on MRI to assess potential injury risk to the popliteal neurovascular bundle.

RESULTS

In the X-ray: holes B and C appeared as the plate in the anterior, only hole C appeared as the plate in the anterolateral, and none of the holes appeared as the plate in the lateral. In the general view of the sawbones, the screw pointed towards the popliteal neurovascular bundle when the plate was in the anterior.

CONCLUSION

If a small number of holes on the plate is visible under fluoroscopy, then several lateral positions of the plate can be obtained; the direction of the screw tunnel tends to deviate from the popliteal neurovascular bundle with the posterior position of the plate.