A novel transcoronal surgical technique for the treatment of cystic lesions of the distal phalanx: A cadaveric study.

OBJECTIVE

To assess the feasibility of a novel transcoronal approach for the treatment of axial type 3 cysts of the palmar/plantar aspect of the distal phalanx (P3).

STUDY

DESIGN

Ex vivo, experimental study.

SAMPLE POPULATION: Ten cadaveric specimens, four forelimbs and six hindlimbs.

METHODS

All cadaveric specimens underwent radiographically guided drilling, followed by cortical screw placement. The cartilage was macroscopically assessed after disarticulation of the distal interphalangeal joint. The entry point and trajectory were evaluated with computed tomography. Results were categorized as: axial, near-axial and abaxial. The minimal distance from the outer margin of the drill hole and the proximal border of the subchondral bone plate was measured using frontal computed tomographic slices.

RESULTS

Eight of the 10 screws were in an axial to near-axial position and nine followed the desired axial to near-axial trajectory. One screw was inserted axially but continued in an abaxial trajectory. Iatrogenic damage to the joint cartilage, flexor cortex and solar canal of P3 was not observed. All cortical screws were placed close to the proximal subchondral bone-plate of P3.

CONCLUSION

The desired axial/near-axial drilling and screw placement, under radiographic guidance, was achieved in nine out of 10 specimens.

CLINICAL SIGNIFICANCE: This novel technique seems promising for the treatment of inaccessible P3 cysts. Additional studies are required to investigate its feasibility in clinical cases, and the long-term outcome following transcystic screw placement of type 3 P3 cysts.