MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1123/jab.2020-0346

Медицинская библиотека · Journal of applied biomechanics · 2021

Load Carriage During Walking Increases Dynamic Stiffness at Distal Lower Limb Joints.

Santos Thiago R T, Fonseca Sergio T, Araújo Vanessa L, Lee Sangjun, Saucedo Fabricio, Allen Stephen, Siviy Christopher, Souza Thales R, Walsh Conor, Holt Kenneth G

СтатьяПеревод в очереди

Аннотация

The addition of a load during walking requires changes in the movement pattern. The investigation of the dynamic joint stiffness behavior may help to understand the lower limb joints' contribution to these changes. This study aimed to investigate the dynamic stiffness of lower limb joints in response to the increased load carried while walking. Thirteen participants walked in two conditions: unloaded (an empty backpack) and loaded (the same backpack plus added mass corresponding to 30% of body mass). Dynamic stiffness was calculated as the linear slope of the regression line on the moment-angle curve during the power absorption phases of the ankle, knee, and hip in the sagittal plane. The results showed that ankle (P = .002) and knee (P < .001) increased their dynamic stiffness during loaded walking compared with unloaded, but no difference was observed at the hip (P = .332). The dynamic stiffness changes were different among joints (P < .001): ankle and knee changes were not different (P < .992), but they had a greater change than hip (P < .001). The nonuniform increases in lower limb joint dynamic stiffness suggest that the ankle and knee are critical joints to deal with the extra loading.

Для цитирования: Santos Thiago R T, Fonseca Sergio T, Araújo Vanessa L, Lee Sangjun, Saucedo Fabricio, Allen Stephen, Siviy Christopher, Souza Thales R, Walsh Conor, Holt Kenneth G. Load Carriage During Walking Increases Dynamic Stiffness at Distal Lower Limb Joints.. Journal of applied biomechanics. 2021. DOI: 10.1123/jab.2020-0346.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.