DOI 10.12200/j.issn.1003-0034.2021.02.008
[Finite element optimization analysis of minimally invasive screw treatment for Sanders typeⅡcalcaneal fracture].
Аннотация
OBJECTIVE
To explore biomechanical characteristics of minimally invasive different screw fixations in treating Sanders typeⅡcalcaneal fractures.
METHODS
Dicom data of calcaneus by CT scan were input into Mimics 21.0 software and Ansys15.0 software to construct three-dimensional finite element digital model of calcaneus;this model was input into UG NX 10.0 software, and calcaneus was cut according to Sanders classification to establish Sanders typeⅡ calcaneus model with posterior articular surface collapse;then simulated minimally invasive screw internal fixation after calcaneal fracture:a screw from posterior articular surface was used to outside-in fix sustentaculum tali, other 4 screws were used to fix calcaneus by different methods through calcaneal tuberosity, and 4 different calcaneal models were obtained. Under the same conditions, 4 types of internal fixation models were loaded respectively, and nonlinear finite element analysis was performed to calculate the stress distribution of different internal fixation models.
RESULTS
Under the same condition of loading, the model 3 had smaller displacement value, maximum calcaneus displacement value and maximum equivalent stress value of the screw than other three internal fixation models, and the stress was more dispersed.
CONCLUSION
In minimally invasive screw internal fixation of calcaneus fracture, after 1 sustentaculum tali screw fixation, 2 screws crossed fix posterior articular surface from calcaneal tuberosity, 2 screws fix parallelly calcaneocuboid joint from calcaneal tuberosity are more suitable for biomechanical requirements, and could provide basic theory for clinical treatment.
Предметные рубрики MeSH
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.