MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.jhazmat.2022.129657

Медицинская библиотека · Journal of hazardous materials · 2022

Evaluation of alkaline activated sodium persulfate sustained release rod for the removal of dissolved trichloroethylene.

Liang Chenju, Weng Chen-Yuan

СтатьяПоддержка правительства СШАПоддержка исследования: вне правительства СШАПеревод в очереди

Аннотация

The presence of trichloroethylene (TCE) dense non-aqueous phase liquid (DNAPL) in the subsurface can generate a dissolved phase plume in groundwater. This study developed an alkaline activated sodium persulfate (SPS) sustained release oxidation rod (alkaline SPS SR-Rod) for long-term in situ chemical oxidation accelerated treatment of TCE dissolved from TCE DNAPL, by creating a greater concentration gradient at the TCE DNPL boundary. The dissolution of TCE DNAPL (1 mL) in water (280 mL) generated ~700 mg L-1, with a volumetric mass transfer coefficient (kLa) of 0.0187 d-1. The alkaline SPS SR-Rod system had a kLa of 0.013 d-1 for TCE dissolution at early stage, and thereafter aqueous TCE concentration remained below ~10 mg L-1 over 60 d of reaction. An SPS SR-Rod life-span of 186 d, for 90% of SPS released from the rod, was estimated. In the soil-water system, aqueous TCE was maintained < 3 mg L- 1 throughout the reaction and the soil oxidant demand was determined to be ~4 g-SPS/kg-soil in the alkaline SPS SR-Rod system. These results revealed that the use of the alkaline SPS SR-Rod can be effective as a method of treating dissolved TCE released from DNAPL contamination, and thereby accelerating TCE DNAPL removal.

Для цитирования: Liang Chenju, Weng Chen-Yuan. Evaluation of alkaline activated sodium persulfate sustained release rod for the removal of dissolved trichloroethylene.. Journal of hazardous materials. 2022. DOI: 10.1016/j.jhazmat.2022.129657.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.