MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.jhazmat.2014.01.004

Медицинская библиотека · Journal of hazardous materials · 2014

Application of polycolloid-releasing substrate to remediate trichloroethylene-contaminated groundwater: a pilot-scale study.

Tsai T T, Liu J K, Chang Y M, Chen K F, Kao C M

СтатьяПеревод в очереди

Аннотация

The objectives of this pilot-scale study were to (1) evaluate the effectiveness of bioremediation of trichloroethylene (TCE)-contaminated groundwater with the supplement of slow polycolloid-releasing substrate (SPRS) (contained vegetable oil, cane molasses, surfactants) under reductive dechlorinating conditions, (2) apply gene analyses to confirm the existence of TCE-dechlorinating genes, and (3) apply the real-time polymerase chain reaction (PCR) to evaluate the variations in TCE-dechlorinating bacteria (Dehalococcoides spp.). Approximately 350L of SPRS solution was supplied into an injection well (IW) and groundwater samples were collected and analyzed from IW and monitor wells periodically. Results show that the SPRS caused a rapid increase of the total organic carbon concentration (up to 5794mg/L), and reductive dechlorination of TCE was significantly enhanced. TCE dechlorination byproducts were observed and up to 99% of TCE removal (initial TCE concentration=1872μg/L) was observed after 50 days of operation. The population of Dehalococcoides spp. increased from 4.6×10(1) to 3.41×10(7)cells/L after 20 days of operation. DNA sequencing results show that there were 31 bacterial species verified, which might be related to TCE biodegradation. Results demonstrate that the microbial analysis and real-time PCR are useful tools to evaluate the effectiveness of TCE reductive dechlorination.

Для цитирования: Tsai T T, Liu J K, Chang Y M, Chen K F, Kao C M. Application of polycolloid-releasing substrate to remediate trichloroethylene-contaminated groundwater: a pilot-scale study.. Journal of hazardous materials. 2014. DOI: 10.1016/j.jhazmat.2014.01.004.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.