Bioresource technology · 2013
Trichloroethylene adsorption by pine needle biochars produced at various pyrolysis temperatures.
СтатьяПоддержка исследования: вне правительства СШАНазвание и аннотация: Перевод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Ahmad Mahtab, Lee Sang Soo, Rajapaksha Anushka Upamali, Vithanage Meththika, Zhang Ming, Cho Ju Sik, Lee Sung-Eun, Ok Yong Sik
Аннотация
In this study, pine needles were converted to biochar (BC) at different pyrolysis temperatures of 300, 500, and 700 °C to sorb trichloroethylene (TCE), and the changes in BC properties with each temperature were evaluated. Pyrolysis temperature showed a pronounced effect on BC properties. Decreases in molar H/C and O/C ratios resulted from removing O- and H-containing functional groups with increasing temperature, and produced high aromaticity and low polarity BCs. BCs produced at higher temperature showed greater TCE removal efficiency from water due to their high surface area, micro-porosity, and carbonized extent. The performance of various BCs for TCE removal was assessed by the Freundlich, Langmuir, Temkin, and Dubinin-Radushkevich adsorption models, among which the Temkin and Dubinin-Radushkevich models best described TCE adsorption onto various BCs, indicating prevailing sorption mechanism as pore-filling.