Gerodontology · 2012
Fracture resistance of maxillary complete dentures subjected to long-term water immersion.
СтатьяНазвание и аннотация: Перевод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Takahashi Yutaka, Yoshida Kaneyoshi, Shimizu Hiroshi
Аннотация
OBJECTIVE: This study investigated the fracture resistance of maxillary acrylic resin complete dentures subjected to long-term water immersion.
MATERIALS AND METHODS: Maxillary acrylic resin complete dentures were fabricated from five denture base resins. Half of the dentures were stored in water for 50 h, and the other half were kept in water for 180 days before testing. Ten specimens were fabricated per group. The flexural load at the proportional limit (FL-PL) of the dentures was tested.
RESULTS: A two-way anova revealed a significant difference in FL-PL because of the denture base material variable. There were no significant differences in FL-PL because of the effect of water immersion and the interaction between the effect of water immersion and the denture base material. The FL-PLs of the dentures fabricated with the two conventional heat-processed resins, the pour-type autopolymerizing resin and the microwave energy-processed resin were not significantly different from each other; they were significantly higher than the light-activated resin in regard to their FL-PL.
CONCLUSION: The FL-PLs of the maxillary acrylic resin complete dentures did not change after long-tern water immersion, and the FL-PL of the denture fabricated from the light-activated resin was lower than those of the other materials.
MATERIALS AND METHODS: Maxillary acrylic resin complete dentures were fabricated from five denture base resins. Half of the dentures were stored in water for 50 h, and the other half were kept in water for 180 days before testing. Ten specimens were fabricated per group. The flexural load at the proportional limit (FL-PL) of the dentures was tested.
RESULTS: A two-way anova revealed a significant difference in FL-PL because of the denture base material variable. There were no significant differences in FL-PL because of the effect of water immersion and the interaction between the effect of water immersion and the denture base material. The FL-PLs of the dentures fabricated with the two conventional heat-processed resins, the pour-type autopolymerizing resin and the microwave energy-processed resin were not significantly different from each other; they were significantly higher than the light-activated resin in regard to their FL-PL.
CONCLUSION: The FL-PLs of the maxillary acrylic resin complete dentures did not change after long-tern water immersion, and the FL-PL of the denture fabricated from the light-activated resin was lower than those of the other materials.
Предметные рубрики MeSH
Acrylic ResinsDental MaterialsDental Stress AnalysisDenture BasesDenture, Complete, UpperHot TemperatureHumansImmersionMaterials TestingMethacrylatesMethylmethacrylateMethylmethacrylatesMicrowavesPhotochemical ProcessesPliabilityPolymerizationPolymethyl MethacrylatePolyurethanesStress, MechanicalTemperatureTime FactorsWater