Temporary hydraulic barriers using organic gel for enhanced aquifer remediation during groundwater flushing: Bench-scale experiments.

This study presents the use of organic gel-forming material for the construction of hydraulic barriers in aquifer, which can be easily removed after use. Experiments on the performance of the temporary hydraulic barrier during NAPL removal (aquifer flushing) were also conducted. An aqueous solution of sodium alginate was injected into the horizontally oriented, 2-dimensional flow chamber packed with sand, followed by gelation using a calcium solution. The alginate gel formed in the porous media produced a circular shape barrier (24 cm diameter, 1.3 cm thickness) that was successfully removed using sodium bicarbonate solution (1.0 M) in 72 h, whereas the gel was stable for 7 days during simulated groundwater flushing at the same flow rate as the sodium bicarbonate solution. When circular hydraulic barriers (12 cm diameter each, 14 cm apart) were set on either side of the NAPL (n-hexane and PCE mixture)-contaminated zone, the increased water flux during water flushing resulted in significantly increased PCE removal by almost 108%. When a surfactant solution (sodium dodecyl sulfate, 0.037%) was applied, the influenced groundwater flow controlled by hydraulic barriers on the NAPL removal was amplified by 196% removal.