Adsorption of Pb and Zn from binary metal solutions and in the presence of dissolved organic carbon by DTPA-functionalised, silica-coated magnetic nanoparticles.

The ability of diethylenetriaminepentaacetic acid (DTPA)-functionalised, silica-coated magnetic nanoparticles to adsorb Pb and Zn from single and bi-metallic metal solutions and from solutions containing dissolved organic carbon was assessed. In all experiments 10 mL solutions containing 10 mg of nanoparticles were used. For single metal solutions (10 mg L-1 Pb or Zn) at pH 2 to 8, extraction efficiencies were typically >70%. In bi-metallic experiments, examining the effect of a background of either Zn or Pb (0.025 mmol L-1) on the adsorption of variable concentrations (0-0.045 mmol L-1) of the other metal (Pb or Zn, respectively) adsorption was well modelled by linear isotherms (R2 > 0.60; p ≤ 0.001) and Pb was preferentially adsorbed relative to Zn. In dissolved organic carbon experiments, the presence of fulvic acid (0, 2.1 and 21 mg DOC L-1) reduced Pb and Zn adsorption from 0.01, 0.1 and 1.0 mmol L-1 solutions. However, even at 21 mg DOC L-1 fulvic acid, extraction efficiencies from 0.01 to 0.1 mmol L-1 solutions remained >80% (Pb) and >50% (Zn). Decreases in extraction efficiency were significant between initial metal concentrations of 0.1 and 1.0 mmol L-1 indicating that at metal loadings between c. 100 mg kg-1 and 300 mg kg-1 occupancy of adsorption sites began to limit further adsorption. The nanoparticles have the potential to perform effectively as metal adsorbents in systems containing more than one metal and dissolved organic carbon at a range of pH values.