Dosimetric evaluation of Rhizophora spp. particleboard bonded with animal protein adhesive at X-ray energies below 100 kVp.

This research developed a bio-based adhesive (AP) derived from industrial slaughterhouse waste, comprising over 85% protein. The adhesive was characterized by a melting point of 193.14 °C, a neutral pH of 7, and a viscosity comparable to common wood adhesives such as urea-formaldehyde and phenol-formaldehyde. Utilizing this adhesive, a Rhizophora spp. particleboard phantom was produced, featuring wood particles of ≤149 μm, an adhesive concentration of 12%, and a target density of 1 g/cm³, adhering to a standard phantom dimension of 30 cm × 30 cm × 30 cm. The dosimetric properties of this particleboard phantom were subsequently compared with those of water and Perspex phantoms within an X-ray energy range of 60-100 kVp, employing high-sensitivity thermo-luminescent dosimeters (TL-100H). The findings indicated that the percentage depth dose (PDD) values of the AP-Rhizophora spp. particleboard were closely aligned with those of the Perspex and water phantoms, with the greatest discrepancy observed at 60 kVp. Additionally, the half-value layer (HVL) of the particleboard was similar to those of Perspex and water, particularly at diagnostic X-ray energies. These results demonstrate that the AP adhesive is effective for creating Rhizophora spp. particleboard phantoms, exhibiting dosimetric properties comparable to tissue-equivalent materials.