Porous chitosan quaternary ammonium salt hydrogel embedded with Cu, Ni and Pd nanoparticles for efficient coupled adsorption-catalytic reduction of methylene blue and 4-nitrophenol.

Anthropogenic wastewater generation and water pollution can have negative impacts on public health and ecosystems. However, most materials do not have both adsorptive and catalytic properties, so the design and development of sustainable and multifunctional materials is essential for wastewater treatment. Herein, composite hydrogel (PHG) containing [2-(Methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl) ammonium hydroxide (SBMA) and chitosan quaternary ammonium salts (HACC) were prepared for wastewater treatment. The adsorption capacities of the PHG hydrogels for nickel (NiII), copper (CuII), and palladium (PdII) ions were 158.68, 182.99, and 229.78 mg/g, respectively. The adsorption process is consistent with the Langmuir adsorption model and quasi-secondary kinetics. For further application of adsorbed metal ions, NaBH4 was selected for in situ reduction to prepare hydrogel-based catalysts cemented with metal nanoparticles (Ni-, Cu- and Pd-NPs), respectively. The PHG-Pd catalysts demonstrated significant catalytic efficiency in reducing 4-nitrophenol and methylene blue, and Kapp were 0.307 and 0.365 min-1, respectively. Among them, the activation parameters for the reduction of 4-NP over PHG-Pd catalyst were calculated as Ea = 36.27 kJ/mol, ΔH# = 33.72 kJ/mol and ΔS# = -259.68 J/(mol·K). This study is expected to provide insights into the design of multifunctional adsorption catalysts for the removal of dyes and nitro compounds from wastewater.