Co-production of high-concentration fermentable sugar and lignin-based bio-adhesive from corncob residue via an enhanced enzymatic hydrolysis.

Xylose plants (produce xylose from corncob through dilute acid treatment) generate a large amount of corncob residue (CCR), most of which are burned and lacked of valorization. Herein, to address this issue, CCR was directly used as starting material for high-solid loading enzymatic hydrolysis via a simple strategy by combining PFI homogenization (for sufficient mixing) with batch-feeding. A maximum glucose concentration of 187.1 g/L was achieved after the saccharification with a solid loading of 25 wt% and enzyme dosage of 10 FPU/g-CCR. Furthermore, the residue of enzymatic hydrolysis (REH) was directly used as a bio-adhesive for plywood production with both high dry (1.7 MPa) and wet (1.1 MPa) surface bonding strength (higher than the standard (0.7 MPa)), and the excellent adhesion was due to the interfacial crosslinking between the REH adhesive (containing lignin, free glucose, and nanosized fibers) and cell wall of woods. Compared with traditional reported adhesives, the REH bio-adhesive has advantages of formaldehyde-free, good moisture resistance, green process, relatively low cost and easy realization. This study presents a simple and effective strategy for better utilization of CCR, which also provides beneficial reference for the valorization of other kinds of lignocellulosic biomass.