MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.jhazmat.2024.134198

Медицинская библиотека · Journal of hazardous materials · 2024

Novel Ag3PO4/ZnWO4-modified graphite felt electrode for photoelectrocatalytic removal of harmful algae: Performance and mechanism.

Cai Chenjian, Fan Gongduan, Cao Xingfeng, Luo Jing, He Zhimin, Wang Shichang, Xu Kai-Qin

СтатьяПоддержка исследования: вне правительства СШАПеревод в очереди

Аннотация

A novel Ag3PO4/ZnWO4-modified graphite felt electrode (AZW@GF) was prepared by drop coating method and applied to photoelectrocatalytic removal of harmful algae. Results showed that approximately 99.21% of chlorophyll a and 91.57% of Microcystin-LR (MCLR) were degraded by the AZW@GF-Pt photoelectrocatalytic system under the optimal operating conditions with a rate constant of 0.02617 min-1 and 0.01416 min-1, respectively. The calculated synergistic coefficient of photoelectrocatalytic algal removal and MC-LR degradation by the AZW@GF-Pt system was both larger than 1.9. In addition, the experiments of quenching experiments and electron spin resonance (ESR) revealed that the photoelectrocatalytic reaction mainly generated •OH and •O2- for algal removal and MC-LR degradation. Furthermore, the potential pathway for photoelectrocatalytic degradation of MC-LR was proposed. Finally, the photoelectrocatalytic cycle algae removal experiments were carried out on AZW@GF electrode, which was found to maintain the algae removal efficiency at about 91% after three cycles of use, indicating that the photoelectrocatalysis of AZW@GF electrode is an effective emergency algae removal technology.

Для цитирования: Cai Chenjian, Fan Gongduan, Cao Xingfeng, Luo Jing, He Zhimin, Wang Shichang, Xu Kai-Qin. Novel Ag3PO4/ZnWO4-modified graphite felt electrode for photoelectrocatalytic removal of harmful algae: Performance and mechanism.. Journal of hazardous materials. 2024. DOI: 10.1016/j.jhazmat.2024.134198.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.