Attic dust assessment near a wood treatment plant: past air pollution and potential exposure.

The wood treatment process uses substances that generate hazardous compounds that may contaminate environmental compartments. In the present study, an area under influence of a deactivated wood treatment plant was investigated to evaluate past air pollution and to try to understand local air dispersion. Attic dust samples were collected from eight residences around the plant and from two residences outside this area, as reference samples. The presence of copper, chromium, arsenic, pentachlorophenol, sixteen priority polycyclic aromatic hydrocarbons and mutagenic activity using Salmonella/microsome assay was evaluated. The residences close to the entrance to the plant were the most affected, according to potentially toxic elements analysis. The PCP concentration was 0.49 mg/kg and the total PAHs content ranged from 0.40 to 13.31 μg/g with greater dispersion than potentially toxic elements. The highest mutagenesis values were 15,905 and 10,399 revertants/g of dust in the absence and presence of S9 mix (mammalian metabolic activation), respectively. Samples in which the total PAHs concentration was less than 2 μg/g no mutagenic effects were observed, including the residences in the reference area. The contribution of PAHs to mutagenesis was 10 percent, indicating that other compounds may contribute to the mutagenic effect. These results suggest that the population was or is potentially exposed to substances with strong effects on health.