MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1007/s10661-019-7827-z

Медицинская библиотека · Environmental monitoring and assessment · 2019

Treatment of aqueous wastes by means of Thermophilic Aerobic Membrane Reactor (TAMR) and nanofiltration (NF): process auditing of a full-scale plant.

Collivignarelli M C, Abbà A, Frattarola A, Manenti S, Todeschini S, Bertanza G, Pedrazzani R

СтатьяПеревод в очереди

Аннотация

This work focuses on the Thermophilic Aerobic Membrane Reactor (TAMR) process. The research was carried out on a full-scale facility where, all along a 12-year period, daily monitoring and process audit tests were conducted for the process analysis and optimization. The plant treated -light and high-strength aqueous wastes and two different configurations were adopted: (1) thermophilic biological reactor + ultrafiltration (TAMR) and (2) TAMR + nanofiltration (TAMR + NF). In the latter case, the average chemical oxygen demand removal yield was equal to 89% and an effective denitrification (nitrogen oxides removal equal to 96%) was achieved by reducing the dissolved oxygen concentration in the bioreactor. Low specific sludge production was observed. Poor sludge settling properties were measured by a lab-scale settling test; respirometric tests (nitrogen uptake rate and ammonia uptake rate) showed the presence of denitrification and the inhibition of nitrification. Hydrodynamic tests revealed the presence of a significant dead space, thus showing room for improving the overall process performance. Finally, the rheological properties of the sludge were measured as a function of the biomass concentration, pH, temperature, and aeration scheme.

Для цитирования: Collivignarelli M C, Abbà A, Frattarola A, Manenti S, Todeschini S, Bertanza G, Pedrazzani R. Treatment of aqueous wastes by means of Thermophilic Aerobic Membrane Reactor (TAMR) and nanofiltration (NF): process auditing of a full-scale plant.. Environmental monitoring and assessment. 2019. DOI: 10.1007/s10661-019-7827-z.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.