MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.jbiosc.2023.02.005

Медицинская библиотека · Journal of bioscience and bioengineering · 2023

Odor reduction using hydrogen sulfide-removing bacteria in sludge filtration systems: Ferrous-oxidizing bacteria and sulfur-oxidizing bacteria.

Choi Daehee, Lee Sangji, Park Hyeri, Kim Jonathan, Park Wansik, Jung Jinyoung

СтатьяПеревод в очереди

Аннотация

The preconditioning of digested sludge in sludge filtration systems produces hydrogen sulfide (H2S), a major odor-causing source. This study evaluated the effects of adding H2S-removing bacteria to sludge-filtration systems. Ferrous-oxidizing bacteria (FOB) and sulfur-oxidizing bacteria (SOB) were mass-cultivated in a hybrid bioreactor equipped with an internal circulation system. In this bioreactor, FOB and SOB effectively removed >99% of H2S; however, the acidic conditions created by adding a coagulant during digested sludge preconditioning were more favorable for FOB than for SOB. In batch tests, SOB and FOB removed 94 ± 1.1% and 99 ± 0.1% of H2S, respectively; therefore, digested sludge preconditioning proved more suitable for FOB activity than SOB activity. The results revealed that the optimal FOB addition ratio was 0.2%, validated using a pilot filtration system. Moreover, the 57.5 ± 2.9 ppm H2S generated in the sludge preconditioning step was reduced to 0.01 ± 0.01 ppm after adding 0.2% FOB. Therefore, the results of this study will be useful because they provide a process for biologically removing odor-causing sources without affecting the dewatering efficiency of the filtration system.

Для цитирования: Choi Daehee, Lee Sangji, Park Hyeri, Kim Jonathan, Park Wansik, Jung Jinyoung. Odor reduction using hydrogen sulfide-removing bacteria in sludge filtration systems: Ferrous-oxidizing bacteria and sulfur-oxidizing bacteria.. Journal of bioscience and bioengineering. 2023. DOI: 10.1016/j.jbiosc.2023.02.005.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.