MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.jhazmat.2014.12.031

Медицинская библиотека · Journal of hazardous materials · 2014

Degradation of carbon tetrachloride in aqueous solution in the thermally activated persulfate system.

Xu Minhui, Gu Xiaogang, Lu Shuguang, Qiu Zhaofu, Sui Qian, Miao Zhouwei, Zang Xueke, Wu Xiaoliang

СтатьяПоддержка исследования: вне правительства СШАПеревод в очереди

Аннотация

Thermal activation of persulfate (PS) has been identified to be effective in the destruction of organic pollutants. The feasibility of carbon tetrachloride (CT) degradation in the thermally activated PS system was evaluated. The experimental results showed that CT could be readily degraded at 50 °C with a PS concentration of 0.5M, and CT degradation and PS consumption followed the pseudo-first order kinetic model. Superoxide radical anion (O2(*-)) was the predominant radical species responsible for CT degradation and the split of CCl was proposed as the possible reaction pathways for CT degradation. The process of CT degradation was accelerated by higher PS dose and lower initial CT concentration. No obvious effect of the initial pH on the degradation of CT was observed in the thermally activated PS system. Cl(*-), HCO3(*-), and humic acid (HA) had negative effects on CT degradation. In addition, the degradation of CT in the thermally activated PS system could be significantly promoted by the solvents addition to the solution. In conclusion, the thermally activated PS process is a promising option in in-situ chemical oxidation/reduction remediation for degrading highly oxidized organic contaminants such as CT that is widely detected in contaminated sites.

Для цитирования: Xu Minhui, Gu Xiaogang, Lu Shuguang, Qiu Zhaofu, Sui Qian, Miao Zhouwei, Zang Xueke, Wu Xiaoliang. Degradation of carbon tetrachloride in aqueous solution in the thermally activated persulfate system.. Journal of hazardous materials. 2014. DOI: 10.1016/j.jhazmat.2014.12.031.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.