On the forensic relevance of tattoos: distinguishing black inks with energy dispersive spectroscopy and backscattered scanning electron microscopy.

PURPOSE: This study aimed to analyze black tattoo inks by means of energy dispersive spectroscopy and backscattered scanning electron microscopy.

METHODS

The sample consisted of five types of commercial tattoo pigments of the black colour (Easy Glow™, Electric Ink™, Iron Works™, Master Ink™, and Viper™). An Energy Dispersive Spectroscopy (EDS) detector (Silicon Drift Detector - SDD - type) attached to a Scanning Electron Microscope (SEM) device (Tescan Vega3 LMU, Libusina, Czech Republic) was used. X-ray characteristic signs were detected for each tattoo ink in an interval between 0 and 2.5 keV. The electron acceleration potential in the microscope was 15 keV. Two regions were analyzed for each sample (n = 10). On each region, a micrography of backscattered electrons (BSE) was obtained. Means and standard deviations (SD) of the weight percentages (Wt%) were calculated.

RESULTS

C and O were predominant, with a mean O/C ratio between 2.69 and 2.74 Wt%. Electric Ink and Master Ink were the most similar pigments, while Easy Glow was the most distinctive - with agglomerates of Al that had a concentration 25 × higher than other specimens. Other compounds detected in the sample were Cl and Cu.

CONCLUSION

EDS and SEM were efficient to distinguish black tattoo inks. These are our preliminary outcomes on the use of EDS and SEM to analyze black tattoo inks. Thus, careful interpretation is necessary to avoid rash applications in human identification practice.