MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1093/sleep/25.7.753

Медицинская библиотека · Sleep · 2002

Validation of a suprasternal pressure transducer for apnea classification during sleep.

Meslier Nicole, Simon Isabelle, Kouatchet Achille, Ouksel Hakima, Person Christine, Racineux Jean-Louis

СтатьяПоддержка исследования: вне правительства СШАВалидационное исследованиеПеревод в очереди

Аннотация

STUDY

OBJECTIVES

To validate a new method of evaluation of respiratory efforts during polysomnographic recordings.

SETTING

NA

PARTICIPANTS

26 patients with sleep apnea syndrome, either during diagnostic assessment (n=16) or under nasal continuous positive airway pressure (n=10).

METHODS

This method consists of measuring suprastemal pressure by a pressure transducer placed over the trachea above the sternal notch (Pst). It was compared to the reference method (ie, esophageal pressure) during the same polysomnogram.

RESULTS

The analysis was based on 3,261 episodes of apnea, classified as obstructive in 2,556 cases, mixed in 347 cases, and central in 358 cases according to the esophageal pressure monitor. The concordance between the two methods was very good, with a sensitivity of Pst of 99.4% for the detection of apneas with respiratory efforts and a specificity of 93.6%. Twenty-three (6.4%) of the 358 central apneas were classified by Pst as apneas with respiratory efforts and 18 of the 353 central apneas classified by Pst were actually apneas with respiratory efforts on the esophageal pressure monitor.

CONCLUSION

The suprasternal pressure transducer, which presents a good sensitivity and a good specificity for identification of respiratory efforts, can be used to classify apneas during polysomnographic recordings in clinical practice.

Для цитирования: Meslier Nicole, Simon Isabelle, Kouatchet Achille, Ouksel Hakima, Person Christine, Racineux Jean-Louis. Validation of a suprasternal pressure transducer for apnea classification during sleep.. Sleep. 2002. DOI: 10.1093/sleep/25.7.753.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.