Study on the removal of fulvic acid in water by potassium ferrate-enhanced iron-manganese co-oxide film and its mechanism.

The previous studies have shown that iron-manganese co-oxide film (MeOx) could simultaneously remove ammonium, manganese ion and bisphenol A. In this study, the removal of fulvic acid (FA) was explored by adding potassium ferrate (K2FeO4) to heighten the catalytic activity of MeOx. After adding about 3.0 mg/L potassium ferrate, the elimination efficiency of 7.0 mg/L FA by the MeOx increased from 20 to 50%. The effects of temperature and ammonium on the elimination of FA were investigated. Higher temperature (above 22 °C) and higher ammonium concentration (above 2.0 mg/L) caused a decrease in FA removal. Most of FA combined with the ferric hydroxide colloid produced by K2FeO4 in water to form macromolecular groups, and they were subsequently absorbed and covered on the surface of MeOx. Scanning electron microscope showed that more viscous flocs appeared on the surface of MeOx, and the film thickness became thicker. Electron energy-dispersive spectrometer analysis revealed a notable increased in the C-O element ratio and a significant decreased in the Mn-Fe element ratio on the surface of MeOx. From Fourier transform infrared spectroscopy, the content of transition metal carbonyl compounds increased in the surface of MeOx. XPS analysis confirmed that the presence of Fe3O4, FeO, Mn2O3 and Mn3O4 along with functional group substances of FA attached on the surface of MeOx. The removal mechanism of FA was studied.