Influence mechanisms of different stalks on iron species type of magnetic biochar prepared from Fe2O3.

The current selection of biomass feedstock for magnetic biochar (MBC) catalysts is highly blind. Consequently, this study delves into understanding how the types of biomass influence the iron species present in MBC catalysts. The process involved the creation of MBC through simulated impregnation-pyrolysis, utilizing six types of stalks and Fe2O3. The type of iron species significantly impacted magnetic properties and likely influenced catalytic properties of MBC. MBC's iron species type was shaped by the reduction effects of the diverse stalks on Fe2O3. During the pyrolysis, discrepancies were observed in the release of reducing gases and direct reduction for the different stalks. These differences in reduction behavior directly accounted for the distinct reduction effects. To delve deeper, the reduction behavior and effect of the main components of the stalk (hemicellulose, cellulose, and lignin) on Fe2O3 were analyzed, highlighting lignin as the most effective. Nonetheless, the absolute values of Pearson's r between lignin content in the stalk and reduction behavior/effect ranged only from 0.078 to 0.421. In contrast, the values for K, Ca, and Si content in the stalks and their influence on reduction behavior and MBC's reduction/metallization degree ranged from 0.410 to 0.910. The catalytic impacts of K and Ca were confirmed through their incorporation into cotton and reed stalks. The disparities in K, Ca, and Si content among the six stalks appeared to be the primary driver behind the diverse iron species in MBC. This work provides a scientific basis for the rational selection of biomass feedstock for MBC catalysts.