One-pot preparation and characterization of lignin-based cation exchange resin and its utilization in Pb (II) removal.

Lignin is a renewable source of aromatics, and the conversion of lignin to chemicals, fuels and materials is very attractive. Herein, a novel lignin-based cation exchange resin (LBR) was easily synthesized through an economical one-pot method. Results demonstrated that the sulfonic acid groups were successfully introduced into the skeleton of the resins, and the S contents and swelling capacity of the prepared LBRs gradually increased with the increment of the sulfonation reagents dosage. A maximum ion-exchange capacity of 2.26 mmol/g was achieved for the LBR obtained at 120 °C for 4 h with a molar ratio of phenol to formaldehyde (P:F) of 1:5 (SSPL-0.50), which was comparable to the commercial phenol type cation exchange resin. Furthermore, the SSPL-0.50 exhibited a high adsorption capacity (167.2 mg/g) for Pb (II) removal. The LBR can be considered as a promising substitute for the petroleum-based ion exchange resin in the purification of wastewater.