Whole-Body Vibration Associated with Dozer Operation at an Australian Surface Coal Mine.

Bulldozers are used extensively on surface mine sites and have been previously identified as being associated with high amplitude whole-body vibration exposures. Previous investigations of this equipment have involved either a very small number of measurements, or measurements of very short duration (or both); or the data obtained were incompletely reported. This research reports 69 measurements (median duration 440 min) obtained from 15 different dozers during operation at a surface coal mine. More than one-third of vertical vibration measurements exceeded the ISO2631.1 Health Guidance Caution Zone when expressed as VDV(8). Considerable variability in measurement amplitudes was found. This was also true within measurements obtained from the same dozers on different shifts suggesting, by a process of elimination, that the remaining variability in whole-body vibration amplitude is a function of some combination of task characteristics, geology, and operator behaviour; rather than equipment-related variability, such as maintenance, suspension, seating, or track design. Short-comings in the evaluation methods provided by ISO2631.1 are highlighted.