MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.scitotenv.2019.136105

Медицинская библиотека · The Science of the total environment · 2019

Enhanced dark fermentative hydrogen production from waste activated sludge by combining potassium ferrate with alkaline pretreatment.

Yang Jingnan, Liu Xinyu, Liu Xuran, Xu Qiuxiang, Wang Wenjun, Wang Dongbo, Yang Guojing, Fu Qizi, Kang Zhenyu, Yang Qi, Liu Yiwen, Wang Qilin, Ni Bing-Jie

СтатьяПеревод в очереди

Аннотация

Alkaline pretreatment was demonstrated to be effective in the enhancement of hydrogen production. However, the sludge solubilization rate of alkaline pretreatment is still limited. This study reports a new strategy of K2FeO4 + pH 9.5 for sludge mesophilic anaerobic fermentation. Experimental results showed that the combination of K2FeO4/pH 9.5 pretreatment had a greater hydrogen yield than the individual K2FeO4 and pH 9.5. The maximum hydrogen yield was 19.2 mL per gram volatile suspended solids (VSS) under the optimal condition (0.02 g per gram total suspended solids K2FeO4 + pH 9.5). Kinetic analysis showed that the highest hydrogen production potential of 19.9 mL/g VSS was obtained in the combined reactor, which well fitted the first-order kinetic model (R2 = 0.9925). Besides, the fermentation type was mainly acetic and butyric in the combined reactor, which contributed to hydrogen production. Further analyses showed that the combined pretreatment reduced hydrogen sulfide yield, providing an environmentally friendly method to sludge treatment.

Для цитирования: Yang Jingnan, Liu Xinyu, Liu Xuran, Xu Qiuxiang, Wang Wenjun, Wang Dongbo, Yang Guojing, Fu Qizi, Kang Zhenyu, Yang Qi, Liu Yiwen, Wang Qilin, Ni Bing-Jie. Enhanced dark fermentative hydrogen production from waste activated sludge by combining potassium ferrate with alkaline pretreatment.. The Science of the total environment. 2019. DOI: 10.1016/j.scitotenv.2019.136105.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.