Step-by-step development and evaluation of a 3D printed home-made low-cost pediatric tracheobronchial tree for foreign body aspiration extractions.

OBJECTIVES: The management of foreign body aspirations (FBA) is dreaded by pediatric physicians due to the high risk of respiratory distress and a potential fatal outcome, favored by a lack of experience of young specialists. Furthermore, there has been an increasing requirement for low-cost simulation. The aim was to describe the step-by-step manufacturing process and to validate a low-cost, easily home-made training model of pediatric tracheo-bronchial tree (pTBT) for simulation-based training in order to teach young physicians to practice foreign body (FBA) extractions.

METHODS: A simulator was designed in order to reproduce the physical and esthetic properties of a pTBT. The production cost of a single simulator was estimated. The simulator was then tested by experienced physicians using a rigid bronchoscope. A manufacturing manual of the simulator is hereby presented. A group of 7 experienced pediatric otolaryngologists performed a FBA extraction in the conditions of installation of an operating room.

RESULTS: The result of the survey showed a high fidelity of the simulator in mimicking the biological esthetics and physical properties of a pTBT during a FBA extraction (mean 4.3 ± 0.8). The total cost of the custom-made simulator is about 20.5 € ($23.4) for the production of the first simulator.

CONCLUSIONS: A highly realistic and easily reproducible pediatric tracheo-bronchial tree simulator is presented and can therefore be used during simulation-based training.