Step-by-step development and evaluation of a 3D printed home-made low-cost pediatric tracheobronchial tree for foreign body aspiration extractions.

OBJECTIVES

The management of foreign body aspirations (FBA) is dreaded by pediatric physicians due to the high risk of respiratory distress and a potential fatal outcome, favored by a lack of experience of young specialists. Furthermore, there has been an increasing requirement for low-cost simulation. The aim was to describe the step-by-step manufacturing process and to validate a low-cost, easily home-made training model of pediatric tracheo-bronchial tree (pTBT) for simulation-based training in order to teach young physicians to practice foreign body (FBA) extractions.

METHODS

A simulator was designed in order to reproduce the physical and esthetic properties of a pTBT. The production cost of a single simulator was estimated. The simulator was then tested by experienced physicians using a rigid bronchoscope. A manufacturing manual of the simulator is hereby presented. A group of 7 experienced pediatric otolaryngologists performed a FBA extraction in the conditions of installation of an operating room.

RESULTS

The result of the survey showed a high fidelity of the simulator in mimicking the biological esthetics and physical properties of a pTBT during a FBA extraction (mean 4.3 ± 0.8). The total cost of the custom-made simulator is about 20.5 € ($23.4) for the production of the first simulator.

CONCLUSIONS

A highly realistic and easily reproducible pediatric tracheo-bronchial tree simulator is presented and can therefore be used during simulation-based training.