MedElevator Войти в исследования
← Поиск публикаций
Медицинская библиотека · Water science and technology : a journal of the International Association on Water Pollution Research · 2005

Performance evaluation of physicochemical processes for biologically pre-treated livestock wastewater.

Hong S W, Choi Y S, Kwon G, Park K Y

Оценочное исследованиеСтатьяПеревод в очереди

Аннотация

The use of a combination of biological and physicochemical methods is a promising technique to reduce highly concentrated pollutants in livestock wastewater: firstly, biodegradable organic matters, nitrogen and a part of phosphorus should be removed in a biological treatment process and then residual non-biodegradable organic matters, color and phosphorus be eliminated by physicochemical methods. In this study, therefore, the integrations of chemical coagulation, activated carbon adsorption, Fenton oxidation and ozonation were evaluated to provide an appropriate post-treatment process for biologically pre-treated livestock wastewater. With applying a single method such as coagulation and Fenton oxidation, a yellowish brown color and COD still remained. According to the experimental result, the quality of treated wastewater including color was enough to be discharged after chemical coagulation followed by ozonation or Fenton oxidation process. Among these, ozonation was the most effective technology for decolorization. Neither simple biological nor physicochemical process provides an adequate treatability for the sufficient depletion of organics and decolorization when treating livestock wastewater. Considering only the removal efficiency, the integration of Fenton oxidation and ozonation would be an efficient alternative as a post-treatment.

Для цитирования: Hong S W, Choi Y S, Kwon G, Park K Y. Performance evaluation of physicochemical processes for biologically pre-treated livestock wastewater.. Water science and technology : a journal of the International Association on Water Pollution Research. 2005.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.