Journal of the science of food and agriculture · 2016
Determination of free cholesterol oxide products in food samples by gas chromatography and accelerated solvent extraction: influence of electron-beam irradiation on cholesterol oxide formation.
СтатьяНазвание и аннотация: Перевод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Lozada-Castro Juan José, Santos-Delgado María Jesús, Polo-Díez Luis María
Аннотация
BACKGROUND: The aim of this study was to develop an efficient method for cholesterol oxide product (COP) determination in irradiated and non-irradiated ready-to-eat foods with high water content by gas chromatography-flame ionisation detector after accelerated solvent extraction (ASE), and derivatisation with a silylating reagent.
RESULTS: The ASE solvent was an 85:15 v/v petroleum ether/chloroform mixture at 40 °C and 1500 psi followed by solid phase extraction. The ASE method was compared with the established lixiviation method, proving an advantageous alternative which reduces analysis time by a factor of 15 and solvent volume by 50%, and minimises the use of chlorinated solvents. COP derivative structures were identified by gas chromatography coupled with mass spectrometry. Analytical characteristics were determined from standards and recoveries were 63-95%, establishing the validity of the method.
CONCLUSION: The results obtained and their analysis by chemometric techniques established COP formation in food samples after e-beam irradiation. Increase in COP concentration depended on both irradiation doses and food composition, mainly water and fat content, although linear correlations among variables were not found. © 2016 Society of Chemical Industry.
RESULTS: The ASE solvent was an 85:15 v/v petroleum ether/chloroform mixture at 40 °C and 1500 psi followed by solid phase extraction. The ASE method was compared with the established lixiviation method, proving an advantageous alternative which reduces analysis time by a factor of 15 and solvent volume by 50%, and minimises the use of chlorinated solvents. COP derivative structures were identified by gas chromatography coupled with mass spectrometry. Analytical characteristics were determined from standards and recoveries were 63-95%, establishing the validity of the method.
CONCLUSION: The results obtained and their analysis by chemometric techniques established COP formation in food samples after e-beam irradiation. Increase in COP concentration depended on both irradiation doses and food composition, mainly water and fat content, although linear correlations among variables were not found. © 2016 Society of Chemical Industry.