MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1007/s11356-022-21646-4

Медицинская библиотека · Environmental science and pollution research international · 2022

Effects of potassium ferrate-walnut shell pretreatment on dehydration performance of residual sludge.

Ding Shaolan, Sang Xiangwei, Zhao Zhen, Ren Huijun

СтатьяПеревод в очереди

Аннотация

Sludge dehydration is not only the first process of sludge reduction but also difficult for sludge treatment and disposal, while the high moisture content of sludge would also limit its resource utilization. In this paper, the residual sludge was treated by the strong oxidizing property of potassium ferrate (PF), and walnut shells were used as a skeleton builder to obtain the recycling dehydrated sludge. It also provides a new solution for the poor stability of PF in the treatment of sludge and waste walnut shells. The experiment results showed that the optimum dosage of PF and walnut shell was 60 mg/gDS and 0.8 g/gDS, respectively, and the water content of the combined PF and walnut shell treatment decreased by 5.2% and 3.7% compared to that of PF conditioning alone and walnut shell conditioning alone, respectively. In addition, scanning electron microscopy and three-dimensional fluorescence spectroscopy revealed a large number of cracks on the sludge surface after the combined treatment, and the sludge floc structure became more loose and dispersed, and the hydrophobic substances humic acid and fulvic acid increased, indicating that the dewatering performance of the sludge was effectively improved, further confirming that the combined PF and walnut shells treatment provides a new idea and method for sludge dewatering.

Для цитирования: Ding Shaolan, Sang Xiangwei, Zhao Zhen, Ren Huijun. Effects of potassium ferrate-walnut shell pretreatment on dehydration performance of residual sludge.. Environmental science and pollution research international. 2022. DOI: 10.1007/s11356-022-21646-4.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.