MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.bios.2014.12.032

Медицинская библиотека · Biosensors & bioelectronics · 2014

A regenerating ultrasensitive electrochemical impedance immunosensor for the detection of adenovirus.

Lin Donghai, Tang Thompson, Jed Harrison D, Lee William E, Jemere Abebaw B

СтатьяПоддержка исследования: вне правительства СШАПеревод в очереди

Аннотация

We report on the development of a regenerable sensitive immunosensor based on electrochemical impedance spectroscopy for the detection of type 5 adenovirus. The multi-layered immunosensor fabrication involved successive modification steps on gold electrodes: (i) modification with self-assembled layer of 1,6-hexanedithiol to which gold nanoparticles were attached via the distal thiol groups, (ii) formation of self-assembled monolayer of 11-mercaptoundecanoic acid onto the gold nanoparticles, (iii) covalent immobilization of monoclonal anti-adenovirus 5 antibody, with EDC/NHS coupling reaction on the nanoparticles, completing the immunosensor. The immunosensor displayed a very good detection limit of 30 virus particles/ml and a wide linear dynamic range of 10(5). An electrochemical reductive desorption technique was employed to completely desorb the components of the immunosensor surface, then re-assemble the sensing layer and reuse the sensor. On a single electrode, the multi-layered immunosensor could be assembled and disassembled at least 30 times with 87% of the original signal intact. The changes of electrode behavior after each assembly and desorption processes were investigated by cyclic voltammetry, electrochemical impedance spectroscopy and X-ray photoelectron spectroscopy techniques.

Для цитирования: Lin Donghai, Tang Thompson, Jed Harrison D, Lee William E, Jemere Abebaw B. A regenerating ultrasensitive electrochemical impedance immunosensor for the detection of adenovirus.. Biosensors & bioelectronics. 2014. DOI: 10.1016/j.bios.2014.12.032.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.