Prosthetics and orthotics international · 2016
The development of a low-cost three-dimensional printed shoulder, arm, and hand prostheses for children.
СтатьяНазвание и аннотация: Перевод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Zuniga Jorge M, Carson Adam M, Peck Jean M, Kalina Thomas, Srivastava Rakesh M, Peck Kirk
Аннотация
BACKGROUND AND AIM: The prosthetic options for higher level amputees are limited and costly. Advancements in computer-aided design programs and three-dimensional printing offer the possibility of designing and manufacturing transitional prostheses at very low cost. The aim of this project was to describe an inexpensive three-dimensional printed mechanical shoulder prosthesis to assist a pre-selected subject in performing bi-manual activities.
TECHNIQUE: The main function of the body-powered, manually adjusted three-dimensional printed shoulder prosthesis is to provide a cost-effective, highly customized transitional device to individuals with congenital or acquired forequarter amputations.
DISCUSSION: After testing the prototype on a young research participant, a partial correction of the patient's spinal deviation was noted due to the counterweight of the device. The patient's family also reported improved balance and performance of some bimanual activities after 2 weeks of using the device. Limitations of the design include low grip strength and low durability. Clinical relevance The prosthetic options for higher level amputees are limited and costly. The low-cost three-dimensional printed shoulder prosthesis described in this study can be used as a transitional device in preparation for a more sophisticated shoulder prosthesis.
TECHNIQUE: The main function of the body-powered, manually adjusted three-dimensional printed shoulder prosthesis is to provide a cost-effective, highly customized transitional device to individuals with congenital or acquired forequarter amputations.
DISCUSSION: After testing the prototype on a young research participant, a partial correction of the patient's spinal deviation was noted due to the counterweight of the device. The patient's family also reported improved balance and performance of some bimanual activities after 2 weeks of using the device. Limitations of the design include low grip strength and low durability. Clinical relevance The prosthetic options for higher level amputees are limited and costly. The low-cost three-dimensional printed shoulder prosthesis described in this study can be used as a transitional device in preparation for a more sophisticated shoulder prosthesis.