The solvent- and surface-dependent adsorption of the lipopeptide antibiotic daptomycin: The general necessity of adsorption tests.

The impact of poor or non-reproducible analyte recoveries due to non-specific drug adsorption on various analytical assays is often underestimated. Even internationally approved guidelines for pharmaceutical analysis such as the EMA guideline on bioanalytical method validation, the ICH guideline M10 on bioanalytical method validation and study sample analysis or the FDA bioanalytical method validation guidance do not adequately encourage more detailed investigations. Furthermore, other areas of research in which the concentration of active pharmaceutical compounds plays a crucial role, for example screening for minimal inhibitory concentrations of bacterial isolates, are potentially affected as well. The aim of this study was to demonstrate the general necessity of drug adsorption tests, using the lipopeptide antibiotic daptomycin as an example. A wide range of typical materials used in processing samples in pharmaceutical and biological analysis, as well as various solvents and biological matrices were included in the experiments. A fully validated LC-MS/MS method was applied for the determination of daptomycin concentrations, which were subsequently used to calculate the recovery. Recovery results (n = 3) ranged from 0.00% to 102.12% with a maximum relative standard deviation of 12.78%. These findings demonstrate that recovery can vary greatly depending on the solvent and the contact material, indicating the need to be optimized and, if applicable, validated. Hence, high reproducibility can only be achieved if all materials (and their manufacturers) used in a method are specified, not just those used in steps considered critical.