Thermophysical properties of some pharmaceutical excipients compressed in tablets.
Аннотация
PURPOSE: Thermophysical properties of three tableting excipients; microcrystalline cellulose, lactose and dicalcium phosphate dihydrate were observed to evaluate their ability to resist temperature induced changes in tablet form.
METHODS
Two thermophysical parameters, thermal diffusivity and specific heat, were measured by a pulse heating method. The materials were also evaluated by differential scanning calorimetry (DSC).
RESULTS
Microcrystalline cellulose in tablet form was found to be rather insensitive to heating and cooling treatments, even though the tablets seemed to remain in a stressed state four weeks after tableting. This stress, indicated by low temperature anomalies, was observed by the pulse method, but not by DSC. When magnesium stearate was incorporated as a lubricant within the microcrystalline cellulose powder, the thermophysical parameters indicated that the internal structure of the tablets changed with heating and cooling. Magnesium stearate eliminated the low temperature anomalies as well. The heat treatment changed the thermophysical properties of tablets made of the crystalline excipients lactose and dicalcium phosphate dihydrate, permanently causing irreversible structural changes.
CONCLUSIONS
The melting of the lubricant together with enhanced stress relaxation in the structure of microcrystalline cellulose most probably caused the improved thermal diffusivity. The observed thermophysical changes with the crystalline excipients were due to changes in tablet's structure and material. The combination of methods used was found to be an accurate and reliable way to obtain useful information on the structural changes and material relaxations of intact tablets during temperature treatment and age-related changes in material properties.
Предметные рубрики MeSH
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.