MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1111/cod.14163

Медицинская библиотека · Contact dermatitis · 2022

Disperse azo dyes, arylamines and halogenated dinitrobenzene compounds in synthetic garments on the Swedish market.

Carlsson Josefine, Åström Tim, Östman Conny, Nilsson Ulrika

СтатьяПеревод в очереди

Аннотация

BACKGROUND

Azobenzene disperse dyes (azo DDs) are well-known as textile allergens, but the knowledge of their occurrence in garments is low. The numerous azo DDs and dye components found in textiles constitute a potential health risk, but only seven azo DDs are included in the European baseline patch test series (EBS).

OBJECTIVES

To investigate non-regulated azo DDs and dye components in synthetic garments on the Swedish market.

METHODS

High-performance liquid chromatography/mass spectrometry, gas chromatography/mass spectrometry and computerized data mining.

RESULTS

Sixty-two azo DDs were detected, with Disperse Red 167:1 occurring in 67%, and 14 other DDs each found in >20% of the garments. Notably, the EBS dyes were less common, three even not detected, while arylamines were frequently detected and exceeded 1 mg/g in several garments. Also, halogenated dinitrobenzenes were identified in 25% of the textiles.

CONCLUSION

Azo DDs and dye components, in complex compositions and with large variations, occurred frequently in the synthetic garments. The arylamines were shown to occur at much higher levels compared to the azo DDs, suggesting the former constitute a potentially higher health risk. The role of arylamines and halogenated dinitrobenzenes in textile allergy has to be further investigated.

Для цитирования: Carlsson Josefine, Åström Tim, Östman Conny, Nilsson Ulrika. Disperse azo dyes, arylamines and halogenated dinitrobenzene compounds in synthetic garments on the Swedish market.. Contact dermatitis. 2022. DOI: 10.1111/cod.14163.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.