Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Annual International Conference · 2021
Lower limb prosthesis: Optimization by lattice and four-bar polycentric knee.
Клинический случайСтатьяПоддержка исследования: вне правительства СШАНазвание и аннотация: Перевод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Contreras-Tenorio Enrique, Kardasch-Nava Ilse, Gonzalez de Salceda Shazer, Fuentes-Alvarez Ruben, Beltran Fernandez Juan Alfonso, Rincon-Martinez Karla, Alfaro-Ponce Mariel, Matehuala-Moran Ivan
Аннотация
Diabetes has brought several health problems; one of the most common is the amputation of the lower limb, for which the development of low-cost lower limb prostheses has taken on an important role to allow people with these injuries to continue independently with their lives. This paper proposes developing a transfemoral prosthesis for a 47-year-old patient with a weight of 100kg and a height of 1.80m. The approach shows the kinematic model of the four-bar mechanism of the knee, following the Denavith-Hartenberg method, and the calculation of the knee angle curve and the gait with the help of OpenSim. Consequently, it is shown the design of the parts of the prosthesis done in Autodesk Fusion 360 and their optimization by a lattice in Creo software. Finally, the stress simulations in Ansys with the materials previously selected in CES EduPack are presented.