Improving Poly(3-Hydroxybutyrate) Properties Using Nanocellulose in Biomedical Applications: Thermal, Mechanical and Biological Studies.

Poly(3-hydroxybutyrate), P3HB, is a biodegradable polymer produced and stored by different bacterial strains, including Ralstonia eutropha H16. P3HB was used to prepare biocompatible composites modified by nanocellulose. This study aimed to assess selected thermal, mechanical, and biological properties of the obtained nanobiocomposites. Thermal properties, as determined by differential scanning calorimetry measurements, were established. The crystallinity of nanocomposites and polymeric matrix was investigated using DSC analyses. The morphology of the nanocomposites was evaluated using scanning electron microscopy. The Food and Drug Administration and the European Medicines Agency confirmed the immunosafety of the tested nanocomposites and noted they had either no or very low levels of endotoxin contamination. Some mechanical properties of the investigated materials were also measured and are presented here. It was estimated that the addition of 1% by mass of nanocrystalline cellulose to P3HB causes the greatest improvement in the plasticization of the material, characterised by the best processing and utility properties. The processing window of nanobiocomposites was extended by approximately 25 °C in reference to the unfilled poly(3-hydroxybutyrate). Mechanical and thermal tests revealed that the most desirable properties oscillate around the addition of 0.5% and 1% nanocrystalline cellulose by mass in the nanobiocomposites. Biological studies on implant applications have shown that the addition of only 0.5% nanofiller to a nanobiocomposite can be of key importance.