A Low-Cost, Lightweight High-Frequency Ultrasound Transducer with Aluminum Electrodes and 3D-Printed Polymer Housing.

There is an increasing demand for ultrasound imaging technologies, particularly wearable and portable systems, for continuous physiological monitoring applications. Although some recent flexible ultrasound devices have adopted polymer encapsulations, typical rigid transducer designs still include metal housings and costly electrodes, contributing to increased device weight and fabrication cost. To address these limitations, we developed an aluminum-electrode/3D-printed polymer-housing ultrasound transducer (APUT) utilizing a polyvinylidene fluoride piezoelectric film. Compared to a gold-electrode/metal-housing ultrasound transducer, the APUT material costs and total weight were approximately 66% and 86% lower, respectively. Acoustic evaluation revealed a center frequency of 24.5 MHz and a fractional bandwidth of 60.9%, with axial and lateral resolutions of 51 and 152 μm, respectively. Furthermore, during a 3-h pulsed operation test, the APUT exhibited an initial increase in capacitance followed by a relatively stable response, with no progressive surface-temperature increase detected within the accuracy of the measurement method. Finally, successful ex vivo imaging of chicken breast tissue confirms the APUT's biomedical applicability, highlighting its potential as a wearable, portable, and disposable ultrasound platform.