Experimental investigation on the high-pressure sand suspension and adsorption capacity of guar gum fracturing fluid in low-permeability shale reservoirs: factor analysis and mechanism disclosure.

Guar fracturing technology has been considered as a kind of popular EOR technology, but the weak static suspension capacity becomes a challenge due to the poor temperature resistance and stability of guar fracturing fluid. The main goal of this investigation is to explore the effect of different factors on the high-pressure static sand suspension of guar gum fracturing fluid by a synthetic efficient nano-ZrO2 cross-linker. In particular, a mechanism of static suspended sand of nano-ZrO2 cross-linker is analyzed by microscopic simulation. The adsorption performance of guar fracturing fluid on the shale surface is also studied for analyzing the environmental pollution and damage of guar gum fracturing fluid to shale reservoirs after cross-linking in this investigation. The results obtained that the inclusion of a small content of nano-ZrO2 cross-linker (0.4%) leads to an apparent increase of fracturing fluid viscosity and decrease in the falling quality of gravel (104 mPa·s and 0.3 g) compared to the classical cross-linker (63 mPa·s and 3.5 g). The lower adsorption capacity of guar fracturing fluid containing nano-ZrO2 cross-linker on the shale surface means that it has a weaker pollution ability to the shale reservoir than the commercially available cross-linker. Meanwhile, the grid structure density formed by nano-cross-linker and guar gum is considered to be the key factor to significantly change the suspended sand capacity. The investigation of nano-cross-linker cannot only provide necessary theoretical technology and data support for the stability of water-based fracturing fluid, efficient sand carrying, and the development of water-based fracturing technology, but also effectively protect the underground shale reservoir.