MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1007/s10529-026-03710-y

Медицинская библиотека · Biotechnology letters · 2026

Immobilized Aspergillus niger lipase over hydrogen titanate nanotubes as a biocatalyst for biodiesel production.

Ahmed Fatma, Raslan Mai, Zaki A H

СтатьяПеревод в очереди

Аннотация

BACKGROUND

Immobilization of lipase enzyme is a promising approach towards cost-effective production of biodiesel to protect the enzyme from denaturation during the transesterification process.

METHODS

In the present study, hydrogen titanate nanotubes (HTNTs), synthesized by simple hydrothermal method, was used to immobilize lipase from Aspergillus niger via physical adsorption with the following ratios of HTNTs and lipase; 1 T: 1 L, 1 T: 0.75 L, 1 T: 0.5 L, and 1 T: 0.25 L. All prepared samples were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The catalytic activities of free and immobilized lipases were evaluated for biodiesel production using sunflower oil, methanol to oil molar ratio of 4: 1 at 40 °C for 90 min.

RESULTS

The biodiesel yields (0% water content, 0.877 g/cm3 density, and 0.041 mg acid value) were 79.2 ± 0.01, 82.3 ± 0.9, 79.1 ± 1.2, 81.97 ± 1.4, 78 ± 0.1 percent for 1 T: 1 L, 1 T: 0.75 L, 1 T: 0.5 L, 1 T: 0.25 L, and free lipase (1 L), respectively. Compared with the control (1 L), immobilizing lipase using (HTNTs) enabled a 50- 75% reduction in lipase required quantity while maintaining or even increasing biodiesel production levels. The work establishes a promising method for lipase immobilization in biodiesel production that can be evaluated for large-scale application in further studies.

Для цитирования: Ahmed Fatma, Raslan Mai, Zaki A H. Immobilized Aspergillus niger lipase over hydrogen titanate nanotubes as a biocatalyst for biodiesel production.. Biotechnology letters. 2026. DOI: 10.1007/s10529-026-03710-y.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.