MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1007/s11356-020-09067-7

Медицинская библиотека · Environmental science and pollution research international · 2020

Comparative response of thermophilic and mesophilic sludge digesters to zinc oxide nanoparticles.

Olaya Wesley, Dilawar Hina, Eskicioglu Cigdem

СтатьяПеревод в очереди

Аннотация

The inevitable discharge of zinc oxide nanoparticles (ZnO NPs), from consumer and industrial products, into wastewater treatment plants (WWTPs) has created a need to determine their effect on sludge digestion. In this study, the effect of particle size (30 nm and 100 nm), type (coated and non-coated), and dose (6, 75, and 150 mg/g feed total solids (TS)) of ZnO NPs on anaerobic sludge digestion was studied under mesophilic (35 °C) and thermophilic (55 °C) conditions. The effect was investigated in two stages with different digester feeding regime: (1) batch biochemical methane potential (BMP) assays, and (2) semi-continuously fed reactors. Results showed that ZnO NPs were inhibitory at medium and high levels (75 and 100 mg ZnO/g TS, respectively). Coated NPs created less inhibition than non-coated NPs. Thermophilic bacteria were more sensitive to ZnO NPs compared with mesophilic bacteria. For the non-coated ZnO NPs, only the mesophilic batch assays were able to recover at the medium concentration and the thermophilic reactors presented chronic inhibition and could not recover. As a beneficial outcome, coated ZnO NPs significantly reduced odor-causing volatile sulfur compounds in digester headspace in comparison with the non-coated NPs. In summary, the condition in which ZnO NPs would have little to no effect would be 6 mg/g TS-coated ZnO NPs under mesophilic conditions.

Для цитирования: Olaya Wesley, Dilawar Hina, Eskicioglu Cigdem. Comparative response of thermophilic and mesophilic sludge digesters to zinc oxide nanoparticles.. Environmental science and pollution research international. 2020. DOI: 10.1007/s11356-020-09067-7.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.