Effect of emulsification-diffusion parameters on the formation of poly (3-hydroxybutyrate-co-3-hydroxyvalerate) particles.

The aim of this work was to evaluate the effect of various production parameters on the formation and particle size of poly (3-hydroxybutyrate-co-3-hydroxyvalerate) PHBV particles prepared by the emulsification-diffusion technique. The increase in homogenization time and speed caused a decrease in particle size. No particle formation was observed below 2% (w/v) PHBV in the organic phase. Smaller particle size and narrower size distribution were observed when polyvinyl alcohol (PVA) was used as a stabilizer, when compared to didodecyldimethylammonium bromide. Submicron particles of 531 ± 150 nm size were obtained with 2% (w/v) PVA at 17 500 rpm and 15 min homogenization conditions with dichloromethane as the organic solvent.