MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1186/s12871-018-0566-9

Медицинская библиотека · BMC anesthesiology · 2018

K-Y™ jelly inhibits increase in endotracheal tube cuff pressure during nitrous oxide exposure in vitro.

Koyama Yukihide, Oshika Hiroyuki, Nishioka Hiroko, Kamoshida Naoko, Tanaka Sousuke, Inagawa Gaku, Andoh Tomio

СтатьяПоддержка исследования: вне правительства СШАПеревод пока не подготовлен

Аннотация

BACKGROUND

The increase in endotracheal tube cuff pressure due to nitrous oxide diffusion is a well-known risk during general anesthesia using nitrous oxide. We hypothesized that lubricating endotracheal tube cuffs with K-Y™ Jelly might inhibit the increase in cuff pressure that occurs during exposure to nitrous oxide.

METHODS

We used two types of endotracheal tube cuffs: one made from ultrathin polyurethane (PU) and another made from conventional polyvinyl chloride (PVC). Using a pediatric trachea model, which consisted of an acrylic cylinder with an internal diameter of 12 mm, we measured changes in the cuff pressure during nitrous oxide exposure in size 5.0-mm internal diameter endotracheal tubes with each type of cuff, with and without lubrication with K-Y™ Jelly.

RESULTS

During nitrous oxide exposure, the increase in cuff pressure was significantly lower in the lubricated cuffs than in the non-lubricated cuffs in both types of cuffs (PVC, P < 0.0001; PU, P < 0.0001). However, the cuff compliance in the trachea model was unaffected by lubrication in both types of cuffs.

CONCLUSIONS

Lubrication of endotracheal tube cuffs with K-Y™ Jelly may effectively delay the increase in cuff pressure that occurs during general anesthesia using nitrous oxide.

Для цитирования: Koyama Yukihide, Oshika Hiroyuki, Nishioka Hiroko, Kamoshida Naoko, Tanaka Sousuke, Inagawa Gaku, Andoh Tomio. K-Y™ jelly inhibits increase in endotracheal tube cuff pressure during nitrous oxide exposure in vitro.. BMC anesthesiology. 2018. DOI: 10.1186/s12871-018-0566-9.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.