Evaluation of a noise reduction system for the assessment of click-evoked otoacoustic emissions.

A recently proposed noise reduction system intended to facilitate the assessment of click-evoked otoacoustic emission (CEOAE) in noisy environments [Comput. Biol. Med. 30, 341 (2000)] is evaluated using 13 normally hearing ears and 9 ears with a sensorineural hearing loss. The noise reduction system is based on an adaptive noise canceller design using an additional noise-only reference microphone and intended to reduce externally generated noise. The system is tested in quiet and at different levels of white noise. The three main design parameters of the noise reduction system (adaptation time constant, length of the adaptive filter, and position of the noise reference microphone) are varied systematically in different experiments. With the noise reduction system active, CEOAE can be assessed correctly at noise levels which are 5 to 9 dB higher than without the noise reduction system. For the range of adaptation time constants considered (65.6 to 656 ms), no statistically significant effect on the amount of noise reduction is observed. Noise reduction is highest when the reference microphone is positioned close to the ear probe. Using this reference microphone position and adaptive filters of 6.56 ms in length, average noise reductions of 7.17 to 8.50 dB are achieved.